SURFSUN --- We care about drinking.
  • 2021-07-27

If you’re looking for the healthiest, cleanest and most purified water for consumption, investing in a proper water cooler is a must. While many have heard of water coolers, it is safe to say that few know exactly just how it works and how the water stays sterile while inside the cooler. These modern water coolers are fitted with internal air filtration systems that prevent bacteria from getting inside the machine, as well as eliminating the possibility of contaminating water, infiltration of contaminants inside the machine and allows for preservation of sterilized water. This process allows for the assurance of your health when consuming water.

Here are some easy steps to follow to make sure your bottled water cooler is clean and ready for your great tasting DrinkMore Bottled Water. Generally, we recommend that you clean and sanitize your water cooler every 6-12 months. Cleaning a bottled water cooler is really pretty easy. Please read ALL the instructions before starting to clean your cooler. Make sure you follow the necessary precautions for a Hot & Cold Cooler. Before you start, you’ll need the following:

1.Thirty minutes of time!

2.Clean rubber gloves

3.Lint-free towel or lint-free paper towels

4.Clean container or bucket that can hold a gallon or two of water

5.Unscented household bleach (just a tiny bit!)

If yours is a hot & cold cooler, then you must plug the hot tank off. You can do this with a small cork or plug. It has to be snug and it fits right in the center hole in the bottom of the cooler’s reservoir. The reason you have to do this is to prevent sanitizer from getting into your hot tank. The hot tank sanitizes itself since it’s very hot! If bleach gets into the hot tank, your hot water will taste like chlorine for many days to follow.

Hence, it’s a complex thing to make the water cooler clean. But you can buy the good dispenser for yourself.

customer-service Customer Service
message Message
go top Top
Scan the QR code Close
qr code

Send Message

* clear input
Choose language